Retrofit Emission Control Device

RECD: The Ultimate Emission Control Solution for Diesel Generators

Be Part of the Solution, Not Pollution

What is RECD?

Automoto RECD retrofit emission control device for DG Set to reduce Particulate Matter (PM) from the exhaust gases. It is designed to capture and remove the fine particles that are produced during the combustion process of diesel generators. The pollutants in the generator’s exhaust first pass through the catalyst along the airflow. Hydrocarbons (HC) and Carbon monoxide (CO) undergo a redox reaction with oxygen, converting them into harmless carbon dioxide (CO2) and water (H2O) .

Our Installation Gallery

Material & Structure

Material

1. Material : 409SS
2. Heat Resistant ferrific stainless steel
3. Corrosion Resistance

Clamp Mechanism

1. Easy to remove filters.
2. Service in less than 2 hours.
3. Hassle-free service
4. Minimal Downtime.

Compensator

1. Material : 304SS.
2. Reduction in Noise
3. Reduce Thermal Expansion of material.
4. Longer life of the RECD

How RECD Kits Works in DG Sets ?

1. TECHNICAL SPECIFICATION

Function: Utilizes inertial collision, interception, diffusion, and gravity settling mechanisms to filter Particulate Matter (PM) from exhaust gas.
Capture Efficiency: Achieves approximately 95% capture efficiency for PM in exhaust gas.
Regeneration: Regeneration uses high temperature to effectively burn away the collected particles. In passive regeneration operating temperature of a diesel generator engine will be high enough to maintain a state of continuous regeneration.
Regeneration Reactions: This involves removal of captured PM through passive regeneration. This relies on NO2 as a reactant to optimize the temperature for continuous regeneration and successful removal of Particulate Matter.

2. WORKING MECHANISM DIESEL OXIDATION CATALYST (DOC)

Structure: Honeycomb-shaped ceramic carrier coated with an oxidized noble metal catalyst
Function: Oxidizes Carbon monoxide (CO), Hydrocarbons (HC), and soluble organic fraction (SOF) in Particulate Matter (PM) in tail gas.
Conversion Efficiency: Approximately 80%-90% for HC and CO, and around 30% for SOF.
Heat Generation: The oxidation process generates significant heat, facilitating the required temperature for SCR reaction or passive regeneration of CDPF.

Monitor DG Health

Online tracks and reports real-time Back Pressure and Temperature from Diesel Generators (DG) with RECD, ensuring CPCB & CAQM compliance through continuous emission monitoring and data transmission.

AUTOMOTO RECD

SMART DIAGNOSTIC SYSTEM

Monitor Back Pressure & Temperature
Indicates health alarms
Facilitates after-sales service
Swiftly identify any issues or anomalies that may arise
Facilitates prompt and efficient maintenance and repairs
Enhances the reliability & durability of your Genset

AUTOMOTO RECD ADVANTAGES

Trusted by many, PAN India presence.
Negligible operational cost & maintenance.
Sleek and Compact Design. 100% indigenous technology.
Our technology is up gradable to meet evolving emission standards.
Compliance with CAQM (Direction No. 76).
Compliance with CPCB regulations Type Approved by ICAT Manesar.
Reduces Particulate Matter (PM) emissions up to 99.21% and Hydrocarbons (HC) and Carbon monoxide (CO) emission by over 70%, right at the source.